ChemBK
  • Home
  • Product Category


ACENAPHTHENE FOR SYNTHESIS 100 G

Acenaphthene

CAS: 83-32-9

Molecular Formula: C12H10

  1. Home
  2. Product Category
  3. Organic raw materials
  4. ACENAPHTHENE FOR SYNTHESIS 100 G

ACENAPHTHENE FOR SYNTHESIS 100 G - Names and Identifiers

Name Acenaphthene
Synonyms NSC 7657
Acenaphthcn
acenaphylene
Acenaphthene
ACENAPHTHENE
NAPHTHYLENEETHYLENE
ethylenenaphthalene
Acenaphthylene, 1,2-dihydro-
ACENAPHTHENE FOR SYNTHESIS 100 G
CAS 83-32-9
EINECS 201-469-6

ACENAPHTHENE FOR SYNTHESIS 100 G - Physico-chemical Properties

Molecular FormulaC12H10
Molar Mass154.21
Density1.06
Melting Point90-94°C(lit.)
Boling Point279°C(lit.)
Flash Point135 °C
Water Solubility0.000347 g/100 mL
Solubility chloroform: 50mg/mL, clear
Vapor Presure10 mm Hg ( 131 °C)
Vapor Density5.32 (vs air)
Appearancecrystalline
Colorbrown-beige
Merck14,28
BRN386081
Storage ConditionStore below +30°C.
StabilityStable. Incompatible with strong oxidizing agents.
Refractive Index1.6048
Physical and Chemical PropertiesWhite needle-like crystals.
UsePhosphonium (also known as naphthalene hexyl ring) is a condensed cyclic aromatic hydrocarbon, generally colorless crystals. Insoluble in water, soluble in alcohol. It is an important derivative of naphthalene. Generally extracted from coal tar, oxidation will be formed after 1,8-naphthalene dicarboxylic anhydride and naphthoquinone.

ACENAPHTHENE FOR SYNTHESIS 100 G - Risk and Safety

Risk CodesR36/37/38 - Irritating to eyes, respiratory system and skin.
R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 
R39/23/24/25 -
R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed.
R11 - Highly Flammable
R52/53 - Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 
R67 - Vapors may cause drowsiness and dizziness
R65 - Harmful: May cause lung damage if swallowed
R38 - Irritating to the skin
R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 
R20 - Harmful by inhalation
Safety DescriptionS26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S60 - This material and its container must be disposed of as hazardous waste.
S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. 
S37/39 - Wear suitable gloves and eye/face protection
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37 - Wear suitable protective clothing and gloves.
S16 - Keep away from sources of ignition.
S7 - Keep container tightly closed.
S62 - If swallowed, do not induce vomitting; seek medical advice immediately and show this container or label.
S36 - Wear suitable protective clothing.
S33 - Take precautionary measures against static discharges.
S25 - Avoid contact with eyes.
S9 - Keep container in a well-ventilated place.
UN IDsUN 3077 9/PG 3
WGK Germany3
RTECSAB1000000
TSCAYes
HS Code29029080
Hazard Class9
Packing GroupIII
ToxicityLD50 orally in Rabbit: > 16000 mg/kg

ACENAPHTHENE FOR SYNTHESIS 100 G - Preliminary Study on solubilization and application of surfactant for lutetium

from VIP

Author:

Chen Baoliang , Ma Shiyu , Zhu Li-Zhong

Abstract:

The solubilization effects of anionic, cationic, nonionic surfactants and anionic, cationic Nonionic mixed surfactants were studied comparatively. SDS ,CTMAB ,Triton x 1 0 0 can significantly increase the solubility in water, the distribution coefficient Kmn on Triton x 1 0 0 monomer is 1 3 0 × 1 0 3,0 92 × 1 0 3,1 3 0 × 1 0 3, the partition coefficients Kmc in the micellar phase are 5 6 4 × 1 0 3,1 5 0 × 1 0 4 ,5 5 7 × 1 0 3, respectively. The anionic Nonionic mixed surfactant and the cationic Nonionic mixed surfactant under certain conditions have synergistic solubilization effect, which is due to the increase of the micelle partition coefficient Kmc of the mixed surfactant. The effects of CTMA singlet state, micelle state and bentonite adsorption state on the distribution, And the size of the normalized distribution coefficient of organic matter on the surfactant monomer, micelle and soil, which provides a reference for the application of surfactants in the remediation of organic pollution

Key words:

surfactant co-solubilization remediation of soil organic pollution

DOI:

10.3321/j.issn:0254-6108.2003.01.010

cited:

233

year:

2003

Last Update:2024-01-02 23:10:35

ACENAPHTHENE FOR SYNTHESIS 100 G - Study on the performance and mechanism of anion-cation organobentonite for adsorption of lutetium in water

from VIP Journal Professional Edition

Author:

Luo Yu , Zhu Li-Zhong

Abstract:

A series of organic bentonite with different proportions of dodecyl trimethyl ammonium bromide (DTMAB), sodium dodecyl sulfate (SDS) and sodium dodecyl benzene sulfonate (SDBS) were prepared, the properties and mechanism of adsorption of phosphonium from aqueous solution by organobentonite were studied. The results showed that the adsorptive capacity of anion-cation organobentonites was higher than that of mono-cation organobentonites, which was related to the type and concentration of anionic surfactants used in the modification; the adsorption isotherms of anion-cation organobentonites are linear, and the adsorption mechanism is mainly distribution.

Key words:

organobentonite mixed surfactant assignment role

DOI:

10.3969/j.issn.1001-3865.2005.04.004

cited:

35

year:

2005

Last Update:2023-08-16 22:08:29

ACENAPHTHENE FOR SYNTHESIS 100 G - Study on the determination of trace amounts of lutetium by β-cyclodextrin induced room temperature phosphorimetry using epoxybromopropane as a heavy atom perturbation agent

Author:

double sensitivity , Liu Changsong , Feng kecong , Zhang Suze

Abstract:

reports of heavy atom perturbators in cyclodextrin-induced room temperature phosphorimetry (CD-RTP) are limited to 1, 2-dibromoethane (DBE) and 1, 2-dibromopropane (DBP). In this paper, a new kind of perturbation agent-epoxybromopropane (EBH) was first found and applied to the determination of trace amounts of americium by β-CD-RTP method. The heavy atom effects of EBH and DBP are compared in detail. The results show that the properties of EBH and DBP are similar, and EBH is more tolerant than DBP in experimental conditions.

Key words:

cyclodextrin induced room temperature polarimetry epoxybromopropane ↑

DOI:

CNKI:SUN:FXHX.0.1991-11-009

cited:

24

year:

1991

Last Update:2023-08-16 22:08:29

ACENAPHTHENE FOR SYNTHESIS 100 G - Simultaneous determination of fluorene, lutetium, anthracene and perylene by derivative-constant energy synchronous fluorimetry

from VIP

Author:

Li Yao-Qun , How Often , Money side , Huang Xianzhi

Abstract:

Abstract:... full text

Key words:

polycyclic aromatic hydrocarbons; Derivative technique; constant energy synchronous fluorescence method

DOI:

http://dspace.xmu.edu.cn:8080/dspace/handle/2288/55561

cited:

51

year:

1997

Last Update:2023-08-16 22:08:29

ACENAPHTHENE FOR SYNTHESIS 100 G - Study on extraction of high purity Xanthene from coal tar wash oil

from Wanfang

Author:

Wang Jun , Liu Wenbin , Snow Peak White , Wu Zhen

Abstract:

The vacuum distillation and solvent extraction methods were used to extract high purity ammonia from coal tar wash oil. When the pressure is 0.05~0.06 MPa, the reflux ratio is 10~20, the extraction temperature is 235~245 ℃, the fraction is recrystallized with anhydrous ethanol, the final product with a purity of more than 99% was obtained.

Key words:

Coal Tar wash oil extract recrystallization

DOI:

CNKI:SUN:HXYZ.0.2005-02-007

cited:

22

year:

2005

Last Update:2023-08-16 22:08:29

ACENAPHTHENE FOR SYNTHESIS 100 G - Reference Information

Henry's Law Constant3.47, 6.21, 10.8, 18.3, and 28.2 at 4.1, 11.0, 18.0, 25.0, and 31.0 °C, respectively (Bamford et al.,1998)
LogP4.04 at 30℃ and pH5-8
(IARC) carcinogen classification 3 (Vol. 92) 2010
NIST chemical information Information provided by: webbook.nist.gov (external link)
EPA chemical information Information provided by: ofmpub.epa.gov (external link)
Introduction Acenaphthene (also known as naphthyl ring) is a condensed cyclic aromatic hydrocarbon, generally colorless crystal. Insoluble in water, soluble in alcohol. It is an important derivative of naphthalene. Acenaphthene is generally extracted from coal tar, and 1, 8-naphthalene diformic anhydride and naphthoquinone will be formed after oxidation.
toxicity 1. acute toxicity LD50:600 mg/kg (rat abdominal cavity).
2. mutagenic microorganisms mutagenic: Salmonella typhimurium 0.5nmol/dish (48h).
Cytogenetic analysis: hamster lung 10mmol/L(6h).
use is a raw material for the production of 1,8-naphthalene dimethyl anhydride, which can be dehydrogenated to prepare acenaphthene resin, can be used to make dyes, plant growth hormones, insecticides and other
organic synthetic raw materials, and acenaphthene nitro can be prepared by nitrification; Further oxidation can produce 1,8-naphthalene dimethyl anhydride and quinone, it can be used for synthetic dyes, polyester resins, polyester fibers; it can also be used for making fluorescent pigments, medicines, pesticides, etc. Acenaphthene is dehydrogenated to obtain acenaphthene, which can make acenaphthene resin.
It is used to produce 1.8-naphthalene diformic anhydride to make dyes; acenaphthene dilute resin can be prepared after dehydrogenation; it can produce plant growth hormone, insecticides, fungicides, etc.
The raw material for producing 1.8-naphthalene diformic anhydride is used to make dyes, can be dehydrogenated to make acenaphthene dilute resin, and can make plant growth hormone insecticides and fungicides.
Acenaphthene and picric acid form orange needle crystals (melting point 162 ℃). Birch reduction (Birch reduction) can occur to obtain 2a,3-acenaphthene (2a,3-acenaphthene). Acenaphthene (acenaphthylene) was obtained by dehydrogenation and oxidation with Pd/C. Oxidation with potassium permanganate to obtain 1, 8-naphthalene diformic anhydride. Electrophilic substitution reactions mainly occur in the 5-position, such as bromination, nitration, and alkylation. It reacts with N-bromosuccinimide (NBS) in carbon tetrachloride to obtain 1-bromine substituents. Existed in coal tar. Laboratory preparation with 1, 8-dibromomethylnaphthalene and phenyl lithium. for organic synthesis. This product is irritating.
production method in high temperature tar, it contains about 1.2%-1.8% acenaphthene. The washing oil separated by coal tar distillation is divided into narrow fractions by rectification method, and industrial acenaphthene is produced from the 270-280 ℃ fraction.
category more flammable solids
toxicity classification poisoning
acute toxicity abdominal cavity-rat LD50: 600 mg/kg
flammability hazard characteristics flammable in case of open flame, high temperature and oxidant; Stimulating gas generated by heating
storage and transportation characteristics warehouse ventilation and low temperature drying; separate from oxidant
fire extinguishing agent water, dry sand, carbon dioxide, foam, 1211 fire extinguishing agent
occupational standard STEL 10 mg/m3
spontaneous combustion temperature >450°C
toxic substance data information provided by: pubchem.ncbi.nlm.nih.gov (external link)
Last Update:2024-04-10 22:29:15
ACENAPHTHENE FOR SYNTHESIS 100 G
Supplier List
CHEMBSF (Shanghai) Biomedical Technology Co., Ltd
Spot supply
Product Name: Acenaphthene Request for quotation
CAS: 83-32-9
Tel: 021-60556179
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Acenaphthene Request for quotation
CAS: 83-32-9
Tel: +86-17505207175
Email: 3787852685@qq.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ message
Wechat: chemical6666
Nantong Reform Petro-Chemical CO., LTD.
Spot supply
Product Name: Acenaphthene Request for quotation
CAS: 83-32-9
Tel: +86-13776910623
Email: r@reformchem.com­
Mobile: +86-13776910623
QQ: 3785839865 Click to send a QQ messageSend QQ message
Wechat: chemical6666 
Shanghai Amole Biotechnology Co., Ltd.
Spot supply
Product Name: Acenaphthene Standard Request for quotation
CAS: 83-32-9
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365 Click to send a QQ message
Wechat: 18916960931
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Acenaphthene Visit Supplier Webpage Request for quotation
CAS: 83-32-9
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Acenaphthene Visit Supplier Webpage Request for quotation
CAS: 83-32-9
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: Acenaphthene Request for quotation
CAS: 83-32-9
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CHEMBSF (Shanghai) Biomedical Technology Co., Ltd
Spot supply
Product Name: Acenaphthene Request for quotation
CAS: 83-32-9
Tel: 021-60556179
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Acenaphthene Request for quotation
CAS: 83-32-9
Tel: +86-17505207175
Email: 3787852685@qq.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ message
Wechat: chemical6666
Nantong Reform Petro-Chemical CO., LTD.
Spot supply
Product Name: Acenaphthene Request for quotation
CAS: 83-32-9
Tel: +86-13776910623
Email: r@reformchem.com­
Mobile: +86-13776910623
QQ: 3785839865 Click to send a QQ messageSend QQ message
Wechat: chemical6666 
Shanghai Amole Biotechnology Co., Ltd.
Spot supply
Product Name: Acenaphthene Standard Request for quotation
CAS: 83-32-9
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365 Click to send a QQ message
Wechat: 18916960931
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Acenaphthene Visit Supplier Webpage Request for quotation
CAS: 83-32-9
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Acenaphthene Visit Supplier Webpage Request for quotation
CAS: 83-32-9
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: Acenaphthene Request for quotation
CAS: 83-32-9
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
View History
ACENAPHTHENE FOR SYNTHESIS 100 G
Dynasylan VTEO
P-PHENYLENEBIS (TRIMELLITATE ANHYDRIDE) (TAHQ)
CLODINAFOP-PROPARGYL PESTANAL
  • Home
  • Product Category

© 2015, 2023 ChemBK.com All Rights Reserved | Build: 20230617001